My business is for sale:
Also:
I'm also looking to sell some or all of my "in house" manufactured parts that I make in my shop to someone who might be like me and likes making things. This is one of those products. To buy my business is a large endeavor. But if you work a full time job or are retired and want to take on my manufactured parts or some of my manufactured parts let me know.
A nice sideline for an ambitious person.
3.4 V6 Swap AC Compressor Bracket: This bracket is used when you install a Camaro / Firebird 3.4 V6 in an 88 Fiero and also use a 85-87 steel engine bracket. It allows you to retain the Fiero 88 V6 AC compressor bracket. In the past you would have had to install a 85-87 cast iron bracket from a 2.8 V6, and then weld in a stud. You would also have had to replace the 88 AC compressor bracket with an 85-87 compressor bracket to make it all work together. This bracket allows you to retain all of the stock 88 air conditioner parts when installing a 3.4. Ed Parks used a 85-87 steel engine bracket that only bolts to the rear side of the engine. Some have used this bracket with the 88 V-6 Fiero U shaped engine bracket but you will need to grind it some to make it fit. Recently someone did this and told me it was not to hard to make it fit on an 88 with the factory V-6 engine bracket. Some grinding was needed.
When you are installing a 3.4 into an 85-87 Fiero you use the factory bracket and weld a bolt into the open hole. Using this bracket is much cleaner/neater.
|
3.4 V6 Swap AC Compressor Bracket $49.50
|
.jpg)
This is the A/C bracket shown against a 2.8 block. The 3.4 block does not have the boss on the lower left side.
Oil Sender Tap Fitting Adapter: Fitting required to install the oil sending unit on 3.4 block with A/C.
|
|
|
Oil Sender Fitting Adapter $8.89
|
Oil Tube Adapter: Corrects the oil dip stick so it reads the correct oil fill level. Simply add the the top of the dip stick tube. Use when you are installing a 3.4 engine in a Fiero and using the 2.8 oil tube and 2.8 dip stick and the 3.4 oil pan.
 |
| Oil tube extender $15.99 |
3.4 Engine Block Oil Tube removal tool: This tool helps in the removal of the dip stick tube. The oil tube can be very difficult to remove from the 2.8 engine.
 |
| Dip stick tube tool $8.95 |
SHIPPING NOTE:
I do not offer free shipping.
Because I use postal flat rate boxes for heavy orders there is no program that can add the proper amount of shipping to every order. So all shipping is added manually by myself after you place your order. That is explained here: Shipping added later explanation
When you place an order the shipping amount will show $0.00. Soon after you place an order you will receive an email confirmation that shows the amount of shipping that was added to your order.
Shipping Shipping is $6.00-$8.50 (Midwest-USA)
Final shipping cost is determined by weight of the item(s) and distance from Milwaukee, WI. Shipping prices quoted are for items shipped to the Midwest area in the USA. If you are ordering a single item or multiple items the total shipping price is determined after you place the order. I try to keep my shipping prices to a minimum and use Postal Flat Rate boxes whenever I can utilize them for an order.
