Now in stock! OEM type Isuzu shift and select cables.
Made like GM OEM cables! Top quality!
Isuzu shift cable Isuzu select cable
OEM GM part numbers:
Shift cable: GM 14105617
Select cable: GM 14105618
- Black sheathing just like OEM.
- OEM style black foam insulation.
- Exact replacement (non adjustable)
Note: The select cable is the one that provides the side to side motion of the gear shift.
My cables are the correct length. Others advertise that they are adjustable and expect that you will make them the correct length after you receive them. Mine are ready to install. No guess work involved.
All my cables include a new ball stud. My competitors expect you to use the old rusty and worn (most likely now undersize) ball stud from your old cable. This will leave you will looseness on that end of the cable.
You will need to reuse your original rubber firewall grommet. To remove it from your old cable take a razor knife and cut in to it up the old cable sheathing (halfway into the rubber grommet). Reinstall the rubber firewall grommet on the new cable.
|1984 Only L4
||MY8 and M19 Muncie 4 speed
||Muncie M17 4 speed
||MT2 Isuzu 5 speed
||MG2 Getrag 5 speed
Cable lengths: Shift cable is about 70" overall
Select cable is about 72" overall
Isuzu L4 (MT2) 5 speed manual transmission replacement cables:
- Shift cable (front to back movement): $95.99
- Select cable (left to right movement): $89.95
My new Fiero shift cables are as awesome as advertised! Absolute top quality & perfect fit. I won’t hesitate to do business with you again; you’ve earned my loyalty.
Gary George Jr.
Use the drop down box to select SHIFT or SELECT cable.
The best way is to take the center plastic skeleton completely out. The plastic skeleton tends to be brittle now that these cars are so old. If you try to install the cables with it in place you may break it. To take it out you need to remove the radio and heater control. To get the heater control out disconnect the cable from the heater box (one hex head screw) in the passenger wheel well. Remove the shift console top and the arm rest. Carefully remove the plastic skeleton. Now you can remove and replace the cable(s). Once the cables are out use a razor knife and cut half way into the rubber grommets. Remove the grommet(s) from the cable(s) and install them on the new cable(s). Install the new cable(s) and reinstall the skeleton and the rest of the items you removed. Be gentile when tightening the screws. Tighten them just enough to hold as the plastic is getting brittle and it is easy to strip out the holes and/or crack the plastic.
I do not offer free shipping.
Because I use postal flat rate boxes for heavy orders there is no program that can add the proper amount of shipping to every order. So all shipping is added manually by myself after you place your order. That is explained here: Shipping added later explanation
When you place an order the shipping amount will show $0.00. Soon after you place an order you will receive an email confirmation that shows the amount of shipping that was added to your order.
Shipping Shipping is $9.00 (Midwest-USA)
Final shipping cost is determined by weight of the item(s) and distance from Milwaukee, WI. Shipping prices quoted are for items shipped to the Midwest area in the USA. If you are ordering a single item or multiple items the total shipping price is determined after you place the order. I try to keep my shipping prices to a minimum and use Postal Flat Rate boxes whenever I can utilize them for an order.