Temperture/Oil Gauge Testing Leads
These temperature and oil gauge testing leads will allow you to determine if your temperature gauge and/or oil pressure gauge is calibrated correctly. Unplug the connector from the appropriate sensor on the engine and plug in one of the leads for a low engine temp or low oil pressure reading test and the other for a high engine temp or a high pressure test. Temperature tester works on all year Fieros. The oil pressure tester works on all 1984-1987 Fieros. You may have to make a simlpe adapter to make it work on the 88 wiring harness. A short poierce of steel cut from a paper clip may work for the 88 Fiero oil pressure tester. A detailed instruction sheet is included with each tester.
|Test Temp/Pressure Readings
Temperature sender note: The plastic wiring harness connector on the temperature sending unit has a very high failure rate. The OEM plastic end degrades even on low mileage Fieros. I have a replacement end available. If you plan on using the temperature tester I suggest you also purchase the replacement end piece. The original factory wires to this temperature sensor are usually in good condition. All you have to do is plug in the original factory harness wires into the new plastic end piece.
Shipping in the USA via First Class Mail is $5.50
Shipping to areas outside of the USA: Generally I ship postal air first class mail. Shipping varies depending on what country they are going to. It ranges from $11.50 to Canada to $18 or more to Australia etc.
I do not offer free shipping.
Because I use postal flat rate boxes for heavy orders there is no program that can add the proper amount of shipping to every order. So all shipping is added manually by myself after you place your order. That is explained here: Shipping added later explanation
When you place an order the shipping amount will show $0.00. Soon after you place an order you will receive an email confirmation that shows the amount of shipping that was added to your order.