- Now In Stock -
Rebuild Your Getrag Slave Cylinder.
Fits all OEM, aftermarket and my aluminum slaves.
The Getrag 5 speed was used on the 86 1/2 - 88 V-6 Fiero's.
This slave cylinder rebuild kit includes a new dual seal piston. new rubber boot, new return spring and a new snap ring.
Features a new dual seal piston!This piston is also available separately.
The the bore size of this cylinder is: 15/16" (0.9375") or 23.81 mm.
Replace your old bleeder screw with a new one!:
Here are some writeups on Pennocks Fiero Forum:
Getrag Slave Cylinder Rebuild kit: $18.95
Dual Seal Piston: $10.45 (Use the drop down to order)
New Slave Bleeder Screw: $2.89 (Use the drop down to order)
An excellent trick to bleed the clutch system:
When I changed from an automatic to a Getrag 5 speed I used the trick Bob Hughes suggested many years ago: Take a clean glass jar (like a mayonnaise jar) with a lid. 1 quart or smaller is OK. Poke 2 holes in the top of the lid. Get some clear tubing from a hardware store. Vinyl clear tubing is cheap. Get 12 feet or so. The ID of this tube should be such that it goes over the bleeder of the slave end snug. Make the holes in the lid of the jar just big enough to allow the tubing to go thru but be a tight fit. Attached one tube maybe 2 feet long to the slave bleeder. Attach the other long tube end to a vacuum port on an engine (I used my truck). Coat the threads of the bleeder screw with some heavy grease or wrap it with Teflon tape so no air gets drawn in past the threads of the bleeder screw. Start the engine you are using for vacuum and let it idle. Make sure you have someone at the front to fill the reservoir and open the bleeder. The vacuum of the running engine will draw the fluid thru the system. Worked excellent for me when I did it.
Shipping: Shipping is $4.00 - $7.00 (Midwest-USA)
Final shipping cost is determined by weight of the item(s) and distance from Milwaukee, WI. Shipping prices quoted are for items shipped to the Midwest area in the USA. If you are ordering a single item or multiple items the total shipping price is determined after you place the order. I try to keep my shipping prices to a minimum and use Postal Flat Rate boxes whenever I can utilize them for an order.