Does the rear decklid on your Fiero fail to stay up?
Have you taken the springs out for an engine change?
Have you added a wing and the lid won't stay up?
Rear Decklid bolt on gas strut kits are easy to install! Your rear deck lid will stay up even on windy days! No more prop rods!
|Single Strut Kits: Assists/replaces the stock springs.
(Single Strut Kit will support the decklid WITH the torsion bars removed.)
1986-1987 Fiero GT Singe Strut Kit
1984-1987 Fiero Coupes: The model requires two holes to be drilled in the bracket that supports the driver's side louver. Bolts and washers are stainless steel.
1986-1987 Fiero GT: This model is a direct bolt in and can be installed in about 10 minutes. No drilling necessary. Bolts and washers are also stainless steel. (1986 GT shown in picture)
1988 Fiero Coupe, Formula and GT: This model is a direct bolt in and can be installed in about 10 minutes. No drilling necessary. Bolts and washers are stainless steel.
Dual Strut Kits: For a Balanced Look
These kits are the same as the above kits but two struts are required and are mounted one on each side. They also require the use of a much higher pressure strut because of the removal of the factory springs. On the 1984-1987 kits, an extra bolt needs to be added and an extra hole needs to be drilled and tapped into the shock tower under the louver bracket for added strength. (1988 GT shown below with Dual Struts)
|84-87 Coupe Dual Strut Kit
||1988 Fiero GT or 1988 Fiero Formula/Coupe Dual Strut Kit Installed
All kits include all necessary bolts and brackets to install them. All bolts and washers are stainless steel. Brackets are painted black and are made of cold rolled steel. Detailed instructions included.
Note: When ordering please include a brief description on why you need a lift kit. I use varying pressures depending on the application. Also remember to include the year and model!
308 kit cars, 328 kit cars, 87/88 Pontiac Mera: Easy to install in your 308 kit, 328 kit or 87/88 Mera. Removal of the original factory springs is required. This is available in a dual kit only. Includes strengthening bars from the shock tower to the hinges. Click here for more info.
Replacement gas struts now available: Like any gas filled lift cylinder they do loose their pressure over time. I now offer replacement gas struts. These replacement gas struts include the lower plastic attaching piece and the upper stainless steel collar. You will reuse the original stainless steel bolt from your old Rodney Dickman strut along with the 2 washers and the inner spacer. These are a direct replacement for one of my old gas struts. Click here for replacement struts.
Some strut kits are machined and assembled when ordered, so please allow a few extra days for your order to ship. Most strut kits are generally in stock and ready to ship.
Note: When ordering please include a brief description on why you need a lift kit. I use varying pressures depending on the application.
NOTE: For those who have done an engine change V-8 etc - In most cases there is generally not enough room on the passenger side for a gas strut. Most non stock engines have something in the way. In those cases you will only be able to use a single strut on the driver's side. A single gas strut works just fine even if you have removed both springs. For this type of application I use a high pressure strut. If you have any questions please contact me at firstname.lastname@example.org
Remember to let me know why you need this kit(s):
Added a wing? Deck lid falls down, removed the factory springs etc.
Add it to the notes area on your order.
I have strut kits for any application. Factory rear deck lid springs left in place, factory rear deck lid springs removed etc.
Here is how some with engine conversions have modified their rear deck lid to accept a rear strut:
If you have cut the rib for clearance this might work for you. If you order a kit and install it like this it is up to you to make the steel plate and make sure it fits. The top bolt has to be far enough away (forward when the lid is closed) so when the deck lid is closed the strut compresses and does not bottom out. Multiple bolts should be installed in that steel plate to spread the load over a large area.
- Single rear strut kits
- 84-87 Coupe single rear strut kit: $56.00
- 86-87 GT single rear strut kit: $56.00
- 1988 GT or coupe single rear strut kit: $62.00
- Dual rear strut kits:
- 84-87 Coupe dual rear strut kit: $100.00
- 86-87 GT dual rear strut kit: $100.00
- 1988 GT or coupe dual rear strut kit: $112.00
I do not offer free shipping.
Because I use postal flat rate boxes for heavy orders there is no program that can add the proper amount of shipping to every order. So all shipping is added manually by myself after you place your order. That is explained here: Shipping added later explanation
When you place an order the shipping amount will show $0.00. Soon after you place an order you will receive an email confirmation that shows the amount of shipping that was added to your order.
Shipping: Shipping is $8.00 (Midwest-USA)
Final shipping cost is determined by weight of the item(s) and distance from Milwaukee, WI. Shipping prices quoted are for items shipped to the Midwest area in the USA. If you are ordering a single item or multiple items the total shipping price is determined after you place the order. I try to keep my shipping prices to a minimum and use Postal Flat Rate boxes whenever I can utilize them for an order.